Sealing Marble Archives - South West London Tile Doctor

Acid Stained Marble Floor Renovation Twickenham

Shine Restored to a Dull Marble Tiled Wet Room Floor in Twickenham

1 Comment / Work History / London Tile Doctor

I was asked to renovate a beautiful dark Marble tiled floor in the wet room of a property in Twickenham. My clients had the tiles installed ten years ago and had never had it professionally cleaned in that time, over the years they had maintained the stone poorly using general floor cleaning products.

Unfortunately, cleaning products with an acid base are not suitable for use on calcium-based stone like Marble, Limestone, Terrazzo and Travertine. The acid reduces the life of the sealer and can react with the calcium leaving stains and, in some cases, etching.

Acid Stained Marble Floor Before Renovation Twickenham

I was able to reassure the client that although the Marble looked beyond renovation it was not the case and that they could be restored to their original condition. They are not the only clients to have had this issue with polished stone and Tile Doctor has worked out a solution that can be used to restore their original polished appearance.

Relieved there was a solution I was asked to provide a quote which was accepted and a date for the work to start agreed.

Cleaning and Repairing a Marble Tiled Bathroom

To start we did a small test in the corner to be sure the renovation plan would be successful, although we have worked on many of these situations before, we still like to do a small verification test before starting any job.

All was well with the test, so the remedy was deployed to the whole floor. This begins with the application of a coarse 400-grit diamond burnishing pad to the floor worked in with water and a solution of Tile Doctor Pro-Clean. This combination removes any remaining sealer and dirt from the marble as well as removing etching. A wet vacuum is then used to extract the slurry from the surface.

Acid Stained Marble Floor During Renovation Twickenham

Once satisfied the tile was ready for the next pad we then went to work with a medium 800-grit pad to deep clean and begin to hone the tile to restore its polished appearance using only water. After another rinse and extraction, we then moved onto the fine 1500-grit pad to bring the tile to a polished appearance again using water for lubrication.

The last pad is a super fine 3500-grit pad which is applied dry using only a small amount of water sprayed onto the tile to fully polish the marble. Our client didn’t want a high gloss, so we concentrated more on giving the tile a nice depth and low shine.

Sealing a Marble Tiled Bathroom

Once the Marble tiles had dried, they were sealed using Tile Doctor X-Tra seal, wiping small amounts into the tile at a time and then removing the excess with a clean cloth. This is especially important with oil-based sealers as too much oil left in the tile will make it sticky once dry and leave a light residue on the surface.

Acid Stained Marble Floor After Renovation Twickenham

X-Tra Seal is rated for external use which makes it a good choice for wet areas, it’s also an impregnator that soaks into the stone protecting it from within and ensuring contaminates remaining on the surface where they can be cleaned away.

Once complete the Marble had a very attractive low gloss finish that was protected and ready for anything they could throw at it…anything but acid-based cleaners! It’s important that if you do ever accidently use the wrong cleaner you immediately wash it away with plenty of clean water. This will neutralise the acid and hopefully save the floor. For a sealed and polished floor like this I recommend Tile Doctor Stone Soap which contains a patina enhancer.

Acid Stained Marble Floor After Renovation Twickenham

Professional Renovation of Marble Flooring in a South London Bathroom

Shine Restored to a Dull Marble Tiled Wet Room Floor in Twickenham Read More »

Restoring the Polish to a Marble Kitchen Countertop in Surbiton

Whilst I was working on a stone floor at a property in Surbiton I was asked if I could do anything about the Marble Countertops in the Kitchen. The Marble had almost completely lost its shine and the owner was keen to have those re-polished to finish the kitchen renovation.

Dull Marble Kitchen Countertop Before Polishing Surbiton

Fortunately, the methods and products we use to renovate stone floors can also be used to restore stone worktops as well. The only difference being we can’t use 17” floor buffers on worktops and countertops so for those we source smaller 6” pads.

The countertop had been worked on before by a different company previously but they had done a horrible job. Bu the time I was asked to look at it the Marble was very dull and covered in different marks, staining from acidic food and lots of etching.

Dull Marble Kitchen Countertop Before Polishing Surbiton

Polishing a Marble Kitchen Countertop

First thing we did was to cover the kitchen in drop cloth and grey blankets to stop the slurry that’s generated during polishing dripping onto the stone floor below.

I then worked through a set of Diamond encrusted Burnishing pads fitted to a handheld DeWalt machine. The pads are applied to the Marble in sequence from 400 to 1500 grit using water for lubrication and then the waste is extracted after each pad using a small Numatic wet vacuum. I inspected the stone after the first pass through the pads and decided it could be better so started again working my way back up through the pads. You can see from the photographs there was a lot of Marble worktop to cover so this did take some time.

Sealing a Marble Countertop

I then left the stone to dry overnight and returned the following day to finish the job starting with a damp test on an electronic moisture meter which showed the Marble was dry.

To bring up a deep shine on the Marble the countertop was given a final polish with a very fine 3000 grit pad using a little water sprayed onto the surface. This final pad adds a nice deep shine to the stone and although it leaves the surface dry, I left an air blower running for a while to make sure.

Later that day I applied a few very fine coats of Tile Doctor X-Tra Seal and gave the surface another buff with a microfiber cloth. This sealer is an impregnator that soaks into the pores of the Marble preventing contaminants from becoming ingrained there and ensuring they remain on the surface where they can easily be cleaned away. Being an oil-based sealer, it really helped to bring out the beauty and colour of the Marble.

Dull Marble Kitchen Countertop After Polishing Surbiton

For the aftercare of stone worktops, we recommend the use of Stone Patina Spray which is a spray-and-buff cleaner that is designed to enhance the natural beauty and lustre of polished stone as it cleans.