Victorian Tiled Lobby Floor Renovated at Richmond Apartment Block
Pictured below is a large Victorian tiled floor in the lobby area of a residential apartment block in Richmond. Building work had been carried out at the property and the contractors had covered the floor using a used a sticky floor protector. Unfortunately, that left a sticky residue on top of the tiles and were overdue a professional deep clean. The floor was cleaned every day for the last eight years but this was done using a mop which isn’t the most effective method.
I paid a visit to the property to work out the best product to remove the adhesive and measure up. From this I worked out a detailed quote for renovating the floor which included two days labour and all the products needed. This was accepted and a date scheduled.
Cleaning a Victorian Tiled Hallway Floor
The hallway was in use by the residents whilst I was there so I had to carry out the following work in sections. To remove the adhesive and give the floor a deep clean the tiles were cleaned with the application of Acid Gel. Being a gel it’s much easier to control and with less water being needed it results in quicker drying times.
The gel was applied and let to soak in for fifteen minutes to give it time to digest the dirt etc, then the floor was lightly moped and I got to work with a scraper to remove as much sticky residue as possible. More Acid Gel was applied and then scrubbed into the tiles using a Victor Trojan buffing machine fitted with a 400-grit burnishing pad and extra weights. The machine was moved slowly across the tiles ensuring all areas where covered.
After completing a small section, the soiling was rinsed and extracted using an industrial wet vacuum. Vacuuming this frequently ensures the fluids had less time to soak into the tile and results in a faster drying time.
Once I had worked my way to the end the floor was vacuumed again and more Acid Gel was applied, this was diluted with a small amount of water and the deep cleaning continued with an 800-grit burnishing pad. As before after each section the floor was rinsed and the soiling immediately extracted with the wet vacuum. Once I was satisfied the floor was in a good condition it was given a final burnishing using a finer 1500-grit pad applied with water and then vacuumed one last time.
Once complete the tiles were clear of the sticky residue and looking very clean indeed. It needed to be completely dry before the next step of sealing so work finished for the day and the tiles were left to dry off completely overnight. It’s important to do this and allow time for all the moisture to evaporate, this way any issues like efflorescent salts will become apparent and resolved.
Sealing a Victorian Tiled Hallway Floor
I returned later the second day to seal the floor starting with several damp meter readings and a quick check of the tiles. Being a communal hallway I wanted to ensure they were still clean from the day before and any marks were spot cleaned.
The floor was then sealed with Tile Doctor Colour Grow which is a colour enhancing hard wearing impregnating sealer that leaves a matt finish and deepens the colour of the black tiles. Three coats were applied using a microfiber cloth and then any excess was buffed with a clean cloth after each application.
Once satisfied I called the managing agent to have a look and they reported that they were extremely happy with the result. In fact, they have since requested that I return every month to maintain the floor correctly and ensure it remains in top condition.
Professional Renovation of a Victorian Tiled Lobby Floor in Southwest London
Victorian Tiled Lobby Floor Renovated at Richmond Apartment Block Read More »